Bug Reports

Sometimes, when I route a trac,e Flux makes a small extra trace when it should be a straight line https://www.loom.com/share/64718c70af83435fae9b60fa7571914d?sid=8e2e5dea-3436-40dd-b7d7-5e102f8f3bca https://www.flux.ai/vasy_skral/raspberry-pi-pico-mcu-rp2350a-no-memory-module-1e1c?editor=pcb_2d

DRC says there are missing MOSI and MISO connection between J2 and J3. I can find the traces that connects J3's D2- pin to J2's D1- pin via MISO, and also can find J3's D1+ pin that connects to J2's D2+'s pin via MOSI. Also, DRC says C7's pin1 and J3's pin VBUS3 have airwires.

I'm doing the design challenge for Flux.ai internship 2024 and the PCB design disappeared suddenly while I was editing the PCB

It aligns to the right instead. Schematic editor works fine, but not on pcb editor

This happens if the layout is translated and/or rotated

If you delete vias it will left invisible traces https://www.loom.com/share/c2867291fdbb4988b6ac2d96804dd278?sid=1344e9e8-0893-48da-b695-76e01b0c6e9c

If you connect two components with a straight horizontal/vertical trace. You won't be able to drag the trace around. but you can move it with arrow keys Loom: https://www.loom.com/share/c0a1e3babb4e473c926fc2c2bfa03e35

https://www.flux.ai/collinsemasi/tlv320adc5140irtwr https://www.flux.ai/collinsemasi/ov5640 When I use this parts in my project, they appear to be missing a pad but when you open the part itself, it has all the pads

When applying a thermal relief rule with "relief connect" on a via, it is not working and there is not thermal relief. (It just work for every other elements like component pads but it it not working for me on the vias in any design I am creating).